Adlink ACL-8111 Bedienungsanleitung PDF herunterladen (Seite 17)

Installation

•

2.4 Base Address Setting

The ACL-8111 requires 16 consecutive address locations in I/O address

space. The base address of the ACL-8111 is restricted by the following

conditions.

The base address must be within the range Hex 200 to Hex 3FF.

The base address should not conflict with any PC reserved I/O address.

See Appendix A.

The base address must not conflict with any add-on card on your own

PC. Please check your PC before installing the ACL-8111.

The ACL-8111's base address is selected by a 6 position DIP switch

SW1.The default setting of base address is set to be HEX 220

All possible

base address combinations are listed as Table 2.2. You may modify the

base address if the address HEX 220 has been occupied by another add-on

card.

SW1 : Base Address = Hex 220

23456

DIP

( 9 8 7 6 5 4 )

Figure 2.4 Default Base Address Setting

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 60 61

Keine Kommentare

Adlink ACL-8111 Bedienungsanleitung Seite 17