Adlink HPERC-IBR-MC Bedienungsanleitung PDF herunterladen (Seite 31)

HPERC-IBR-M

2 Internal Components

This chapter discusses the optional components inside the HPERC-IBR-M enclosure. These

components include the SSDs (Solid State Drives), the SD Memory Card, the PCI/104-Express

expansion module, the SODIMM memory, and the Mini PCIe Card.

2.1 HPERC-IBR-M Assembly Procedures

The following procedures describe how to remove and install the HPERC-IBR-M internal com-

ponents. To gain access to certain components in the HPERC-IBR-M, you first must remove

other components in the system.

2.1.1 Tools Required

Use these tools to install and remove components into or out of the HPERC-IBR-M enclosure.

X Hex screwdriver set

X Anti-static service kit - Use a complete anti-static service kit (or the equivalent) to remove

or install static-sensitive components. A complete anti-static service kit should include a

static-dissipating work surface, a chassis clip lead, and a wrist or ankle strap.

2.1.2 Shutting Down the HPERC-IBR-M

Always use the following procedure when shutting down the HPERC-IBR-M.

To shut down the HPERC-IBR-M

1) Initiate a shut down sequence through the OS, or hold down the power button on the

corresponding military breakout cable for 4-6 seconds to turn off power.

2) Disconnect the power cable from the DC Power IN connector of the I/O panel.

NOTE: Some of the figures in this chapter show only the heat sink version of the HPERC-IBR-M

because the procedure described is the same for both versions. For clarity, the figures in this chapter

may not show some of the cables or components.

CAUTION: Components in the HPERC-IBR-M are sensitive to static electricity and can be easily

damaged by improper handling. Do the following when handling the HPERC-IBR-M.

Always use an anti-static wrist/ankle strap and a grounding mat.

Before you handle the HPERC-IBR-M, touch a grounded, unpainted metal surface to discharge any

static electricity.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Keine Kommentare

Adlink HPERC-IBR-MC Bedienungsanleitung Seite 31