Adlink LEC-BASE R1 Bedienungsanleitung PDF herunterladen (Seite 17)

Interface Signals 11

LEC-BASE

2.1.3 Camera 1 (CAM1)

Table 2-6 lists the pin signals of the Camera1 header, which provides 10-pins, 2 rows, odd/even

pin sequence (1, 2) with 0.079" (2.00mm) pitch. These signals are connected to the camera

control signals at the SMARC connector.

NOTE: The shaded table cells denote ground.

2.1.4 Camera 3 (CAM3)

Table 2-7 lists the pin signals of the Camera 3 header, which provides 10-pins, 2 rows, odd/even

pin sequence (1, 2) with 0.079" (2.00mm) pitch. These signals are connected to the camera

control signals at the SMARC connector.

Table 2-6: Camera 1 Pin Signals (CAM1)

Pin # Signal

1 CSI0_CK+

2 CSI0_CK-

3 CSI0_D0+

4 CSI0_D0-

5 CSI0_D1+

6 Not Connected

7 CSI0_D1-

8 Not Connected

GND

Table 2-7: Camera 3 Pin Signals (CAM3)

Pin # Signal

1 CAM0_nPWR

2 I2C_CAM_CLK_1.8V

3 Not Connected

4 I2C_CAM_DATA_1.8V

5 Not Connected

6 Not Connected

7 CAM0_nRST_3V over the 3.3V level shifter

8 Not Connected

95 Volt

10 Not Connected

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Keine Kommentare

Adlink LEC-BASE R1 Bedienungsanleitung Seite 17