Adlink LEC-BTS Bedienungsanleitung PDF herunterladen (Seite 14)

10 Interfaces

3.17 SMARC Interface Signals

Table 3-2 provides the pin signals for the SMARC P-S connector. Refer to the SMARC specifica-

tion at http://www.sget.org/standards/smarc.html

for definitions of the SMARC signals.

Table 3-2: SMARC P-S Connector (GF1) Signal Descriptions

Pin # Primary (Top Side) Pin # Secondary (Bottom Side)

S1 Not connected

P1 Not connected S2 Not connected

P2 GND S3 GND

P3 CSI1_CK+ S4 Not connected

P4 CSI1_CK- S5 I2C_CAM_CK

P5 Not connected S6 Not connected

P6 Not connected S7 I2C_CAM_DAT

P7 CSI1_D0+ S8 CSI0_CK+

P8 CSI1_D0- S9 CSI0_CK-

P9 GND S10 GND

P10 CSI1_D1+ S11 CSI0_D0+

P11 CSI1_D1- S12 CSI0_D0-

P12 GND S13 GND

P13 CSI1_D2+ S14 Not connected

P14 CSI1_D2- S15 Not connected

P15 GND S16 GND

P16 CSI1_D3+ S17 Not connected

P17 CSI1_D3 S18 Not connected

P18 GND S19 Not connected

P19 GBE_MDI3- S20 Not connected

P20 GBE_MDI3+ S21 Not connected

P21 GBE_LINK100# (Ethernet Speed

LED)

S22 Not connected

P22 GBE_LINK1000# (Ethernet Speed

LED)

S23 Not connected

P23 GBE_MDI2- S24 Not connected

P24 GBE_MDI2+ S25 GND

P25 GBE_LINK_ACT# (LAN Link LED) S26 SDMMC_D0

P26 GBE_MDI1- S27 SDMMC_D1

P27 GBE_MDI1+ S28 SDMMC_D2

P28 GBE_CTREF S29 SDMMC_D3

P29 GBE0_MDI0- S30 SDMMC_D4

P30 GBE0_MDI0+ S31 SDMMC_D5

P31 Not connected S32 SDMMC_D6

P32

GND

S33 SDMMC_D7

P33 SDIO_WP S34 GND

P34 SDIO_CMD S35 SDMMC_CK

P35 SDIO_CD# S36 SDMMC_CMD

P36 SDIO_CK S37 SDMMC_RST#

P37 SDIO_PWR_EN S38 Not connected

P38 GND S39 I2S0_LRCK

P39 SDIO_D0 S40 I2S0_SDOUT

P40 SDIO_D1 S41 I2S0_SDIN

P41 SDIO_D2 S42 I2S0_CK

P42 SDIO_D3 S43 Not connected

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Adlink LEC-BTS Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Adlink LEC-BTS