Adlink cExpress-BL Bedienungsanleitung

cExpress-BL User’s Manual Manual Revision: 1.00 Revision Date: May 7, 2015 Part Number: 50-1J061-1000

Page 10 cExpress-BL 2.16 Functional Diagram

cExpress-BL Page 11 2.17 Mechanical Drawing Top ViewSide ViewAll tolerances ± 0.05 mmOther tolerances ± 0.2 mmconnectors on bottom side Dimensio

Page 12 cExpress-BL 3 Pinouts and Signal Descriptions 3.1 AB/CD Pin Definitions The cExpress-BL is a Type 6 module supporting USB 3.0 upgrade sig

cExpress-BL Page 13 Row A Row B Row C Row D Pin Name Pin Name Pin Name Pin Name A36 USB6- B36 USB7- C36 DDI3_CTRLCLK_AUX+ D36 DDI1_PAIR3

Page 14 cExpress-BL Row A Row B Row C Row D Pin Name Pin Name Pin Name Pin Name A80 GND (FIXED) B80 GND (FIXED) C80 GND (FIXED) D80 GND

cExpress-BL Page 15 3.2 Signal Description Terminology The following terms are used in the COM Express AB/CD Signal Descriptions below. I Inpu

Page 16 cExpress-BL 3.3 AB Signal Descriptions 3.3.1 Audio Signals Signal Pin # Description I/O PU/PD Comment AC_RST# / HDA_RST# A30 Reset

cExpress-BL Page 17 3.3.3 LVDS/eDP Signal Pin # Description I/O PU/PD Comment LVDS_A0+ LVDS_A0- LVDS_A1+ LVDS_A1- LVDS_A2+ LVDS_A2- - LV

Page 18 cExpress-BL 3.3.4 Gigabit Ethernet Gigabit Ethernet Pin # Description I/O PU/PD Comment GBE0_MDI0+ GBE0_MDI0- GBE0_MDI1+ GBE0_MDI1

cExpress-BL Page 19 3.3.6 PCI Express Signal Pin # Description I/O PU/PD Comment PCIE_TX0+ PCIE_TX0- A68 A69 PCI Express channel 0, Transmit

Page 2 cExpress-BL Revision History Revision Description Date By 1.00 Initial release 2015-05-07 JC

Page 20 cExpress-BL 3.3.9 USB Signal Pin # Description I/O PU/PD Comment USB0+ USB0- A46 A45 USB differential data pairs for Port 0 I/O 3.3V

cExpress-BL Page 21 3.3.10 USB Root Segmentation 3.3.11 SPI (BIOS only) Signal Pin # Description I/O PU/PD Comment SPI_CS# B97 Chip s

Page 22 cExpress-BL 3.3.12 Miscellaneous Signal Pin # Description I/O PU/PD Comment SPKR B32 Output for audio enunciator, the “speaker” in

cExpress-BL Page 23 Signal Pin # Description I/O PU/PD Comment GPO[3] B63 General purpose output pins. O 3.3V PU 10K 3.3V After hardware

Page 24 cExpress-BL Signal Pin # Description I/O PU/PD Comment BATLOW# A27 Battery low input. This signal may be driven low by external circ

cExpress-BL Page 25 3.4 CD Signal Descriptions 3.4.1 USB 3.0 extension Signal Pin Description I/O PU/PD Comment USB_SSRX0- USB_SSRX0+ C3 C4

Page 26 cExpress-BL 3.4.3 DDI Channels DDI 1 Signal Pin Description I/O PU/PD Comment DDI1_PAIR0+ DDI1_PAIR0- DDI1_PAIR1+ DDI1_PAIR1- DDI1_PA

cExpress-BL Page 27 DDI 2 Signal Pin Description I/O PU/PD Comment DDI2_PAIR0+ DDI2_PAIR0- DDI2_PAIR1+ DDI2_PAIR1- DDI2_PAIR2+ DDI2_PAIR2- DDI

Page 28 cExpress-BL 3.4.4 DDI to DP/HDMI/SDVO Mapping Pin Pin Name DP HDMI \ DVI D26 DDI1_PAIR0+ DP1_LANE0+ TMDS1_DATA2+ D27 DDI1_PAIR0- DP1

cExpress-BL Page 29 3.4.5 PCI Express Graphics x16 (PEG) Signal Pin Description I/O PU/PD Comment PEG_RX0+ PEG_RX0- PEG_RX1+ PEG_RX1- PEG

cExpress-BL Page 3 Preface Copyright 2015 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All right

Page 30 cExpress-BL Signal Pin Description I/O PU/PD Comment PEG_TX15+ PEG_TX15- D101 D102 PEG_LANE_RV# D54 PCI Express Graphics lane rever

cExpress-BL Page 31 4 Connector Pinouts on Module This chapter describes connectors and pinouts, LEDs and switches that are used on the module but

Page 32 cExpress-BL 4.1 40-pin Debug Connector ¾ FPC Connector Type: FCI 59GF Flex 10042867 ¾ Pin Orientation ¾ cExpress-BL and the DB40 D

cExpress-BL Page 33 ¾ 40-pin Debug Connector Pin Definition on the COM Express Module Pin Interface Signal Remark Pin Interface Signal

Page 34 cExpress-BL 4.2 Status LEDs To facilitate easier maintenance, status LED’s are mounted on the board. ¾ LED Descriptions Name Color Co

cExpress-BL Page 35 4.3 XDP Debug header The debug port is a connection into a target-system environment that provides access to JTAG, run control

Page 36 cExpress-BL 4.4 Fan Connector ¾ Connector Type: JVE 24W1125A-04M00 ¾ Pin Assignment Name Signal Description 1 BMC_FAN_OUT FAN_PWMOUT 2

cExpress-BL Page 37 5 Smart Embedded Management Agent (SEMA) The onboard microcontroller (BMC) implements power sequencing and Smart Embedded Mana

Page 38 cExpress-BL 5.1 Board Specific SEMA Functions 5.1.1 Voltages The BMC of the cExpress-BL implements a voltage monitor and samples several

cExpress-BL Page 39 5.1.4 Exception Codes In case of an error, the BMC drives a blinking code on the blue Status LED (LED1). The same error code i

Page 4 cExpress-BL Table of Contents Revision History ...

Page 40 cExpress-BL 6 System Resources 6.1 System Memory Map Address Range (decimal) Address Range (hex) Size Description (4GB-2MB) FFE00000

cExpress-BL Page 41 6.3 I/O Map Hex Range Device 000-01F Reserved 020-02D and 030-03F Interrupt controller 1, 8259 equivalent 02E-02F LPC SIO (

Page 42 cExpress-BL Hex Range Device 3F0-3F7 Available 3F8-3FF Serial port 1 4D0 Master PIC Edge/Level Trigger register 4D1 Slave PIC Edge/Lev

cExpress-BL Page 43 6.4 Interrupt Request (IRQ) Lines PIC Mode IRQ# Typical Intterupt Resource Connected to Pin Available 0 Counter 0 N/A No

Page 44 cExpress-BL IRQ# Typical Intterupt Resource Connected to Pin Available 11 Serial Port 4 (COM4) IRQ11 via SERIRQ / PIRQ Note (1) 12 P

cExpress-BL Page 45 6.5 PCI Configuration Space Map Bus Number Device Number Function Number Routing Description 00h 00h 00h N/A Intel host

Page 46 cExpress-BL 6.6 PCI Interrupt Routing Map INT Line P.E.G Root Port Audio Controller xHCI Controller ME Controller#1 ME Controller #2 IDE-

cExpress-BL Page 47 7 BIOS Setup 7.1 Menu Structure This section presents the six primary menus of the BIOS Setup Utility. Use the following tabl

Page 48 cExpress-BL 7.2 Main The Main Menu provides read-only information about your system and also allows you to set the System Date and Time.

cExpress-BL Page 49 7.2.5 Main >System Management > Board Information Board Information Info only SEMA Firmware Read only Display SEMA

cExpress-BL Page 5 5 Smart Embedded Management Agent (SEMA) ... 37 5.1 Board Specific SEMA Functions

Page 50 cExpress-BL Feature Options Description V3.30 Read only Display actual voltage of the V3.30. VMEM Read only Display actual voltage

cExpress-BL Page 51 7.2.11 System Management > LVDS Backlight Feature Options Description LVDS Backlight Info only LVDS Backlight Bright

Page 52 cExpress-BL 7.3 Advanced Menu This menu contains the settings for most of the user interfaces in the system. 7.3.1 Advanced > CPU Subm

cExpress-BL Page 53 Feature Options Description CPU C7 Report Disabled CPU C7 CPU C7S Enable / Disable CPU C7 report to OS. C1 State auto un

Page 54 cExpress-BL Feature Options Description IGfx Frequency Info only Display IGfx Frequency. Graphics Turbo IMON Current Number entry f

cExpress-BL Page 55 Feature Options Description 1920X1200 1440X900 1600X900 1024X768 LVDS2 1280X800 1920X1080 2048X1536 Active LFP No LVDS

Page 56 cExpress-BL Feature Options Description RAID1 Enabled Disabled Enable / Disable RAID1 feature. RAID10 Enabled Disabled Enable / Disa

cExpress-BL Page 57 7.3.7 Advanced > USB Submenu Feature Options Description USB Module Version Info only USB Devices Info only X Drive

Page 58 cExpress-BL 7.3.9 Advanced > Network Submenu Feature Options Description Network Stack Info only Network Stack Enabled Disable

cExpress-BL Page 59 Feature Options Description 64 PCI Bus Clocks 96 PCI Bus Clocks 128 PCI Bus Clocks 160 PCI Bus Clocks 192 PCI Bus Clocks 2

Page 6 cExpress-BL 1 Introduction The cExpress-BL is a COM Express® COM.0 R2.1 Type 6 Compact size module featuring the 64-bit 5th Generation Inte

Page 60 cExpress-BL 7.3.11 Advanced > PCI and PCIe > PCH-PCIe Configuration Feature Options Description PCH-PCIe Configuration Info on

cExpress-BL Page 61 Feature Options Description SENFE Disable Enable Enable / Disable Root PCI Express System Error on Non-Fatal Error. SECE

Page 62 cExpress-BL Feature Options Description Serial Port 2 Configuration Serial Port Device Settings Change Settings Enabled Disabled

cExpress-BL Page 63 Feature Options Description ATX BIOS will report no suspend functions to ACPI OS. In windows XP, it will make OS show shu

Page 64 cExpress-BL 7.3.17 Advanced > Serial Port Console > Console Redirection Feature Options Description Console Redirection Setting

cExpress-BL Page 65 Feature Options Description settings. Set to Disabled for manual conmfiguration. Critical Trip Point Disable 85 C 95C Thi

Page 66 cExpress-BL 7.4 Boot Menu The Boot Menu allows control of Boot features 7.4.1 Boot > Boot Configuration Feature Options Descriptio

cExpress-BL Page 67 7.5 Security Menu 7.5.1 Security > Password Description Feature Options Description Administrator Password Enter pass

Page 68 cExpress-BL 8 BIOS Checkpoints, Beep Codes This section of this document lists checkpoints and beep codes generated by AMI Aptio BIOS. The

cExpress-BL Page 69 8.1 Status Code Ranges Status Code Range Description 0x01 – 0x0B SEC execution 0x0C – 0x0F SEC errors 0x10 – 0x2F PE

cExpress-BL Page 7 2 Specifications 2.1 Core System ¾ CPU: 5th Generation Intel® Core™ processor SoC (formerly “Broadwell-U”) • Intel® Core™ i

Page 70 cExpress-BL SEC Error Codes 0x0C – 0x0D Reserved for future AMI SEC error codes 0x0E Microcode not found 0x0F Microcode not loaded

cExpress-BL Page 71 Status Code Description 0x36 CPU post-memory initialization. System Management Mode (SMM) initialization 0x37 Post-Mem

Page 72 cExpress-BL Status Code Description 0xEB S3 OS Wake Error 0xEC-0xEF Reserved for future AMI error codes Recovery Progress Codes 0

cExpress-BL Page 73 Status Code Description 0x66 CPU DXE initialization (CPU module specific) 0x67 CPU DXE initialization (CPU module speci

Page 74 cExpress-BL Status Code Description 0x9D USB Enable 0x9E – 0x9F Reserved for future AMI codes 0xA0 IDE initialization is started

cExpress-BL Page 75 Status Code Description 0xD6 No Console Output Devices are found 0xD7 No Console Input Devices are found 0xD8 Invali

Page 76 cExpress-BL 8.3 OEM-Reserved Checkpoint Ranges Status Code Description 0x05 OEM SEC initialization before microcode loading 0x0A O

cExpress-BL Page 77 9 Mechanical Information 9.1 Board-to-Board Connectors To allow for different stacking heights, the receptacles for COM Expre

Page 78 cExpress-BL 9.2 Thermal Solution 9.2.1 Heat Spreaders The function of the heat spreader is to ensure an identical mechanical profile for

cExpress-BL Page 79 Step 4: Use the four M2.5, L=6mm screws provided to fasten the heatsink to the module. Step 5: Place the COM Express modu

Page 8 cExpress-BL 2.4 Audio ¾ Integrated: Intel® HD Audio integrated on SoC ¾ Codec: Realtek ALC886 on Express-BASE6 Reference Carrier Board 2.

Page 80 cExpress-BL 9.3 Mounting Methods There are several standard ways to mount the COM Express module with a thermal solution onto a carrier bo

cExpress-BL Page 81 9.4 Standoff Types The standoffs available for Top and Bottom mounting methods are shown below. Note that threaded standoffs a

Page 82 cExpress-BL Safety Instructions Read and follow all instructions marked on the product and in the documentation before you operate your sys

cExpress-BL Page 83 Getting Service ADLINK Technology, Inc. Address: 9F, No.166 Jian Yi Road, Zhonghe District New Taipei City 235, Taiwan Tel:

Page 84 cExpress-BL ADLINK Technology, Inc. (French Liaison Office) Address: 6 allée de Londres, Immeuble Ceylan 91940 Les Ulis, France Tel:

cExpress-BL Page 9 2.11 Power Specifications ¾ Power Modes: AT and ATX mode (AT mode startup controlled by SEMA Board Controller) ¾ Standa