Adlink Express-IB Bedienungsanleitung PDF herunterladen (Seite 63)

Express-IB Page 63

GTT LVDS Backlight Control

GTT LVDS Backlight Control. Note: This setting will be reset by the Graphics Driver.

DDI function choose

DDI function set to Display Port or HDMI.

BIA

Auto: GMCH use VBT default. Level n: Enabled with selected aggressiveness level.

Spread Spectrum clock

Hardware: Spread is controlled by chip. Software: Spread is controlled by BIOS.

TV1 Standard

Select the ability to configure a TV Format

TV2 Standard

Select the ability to configure a TV Minor Format

ALS Support

Valid only for ACPI. Legacy = ALS Support through the IGD INT10 function. ACPI = ALS support through an ACPI ALS driver.

Active LFP

Select the Active LFP Configuration. No LVDS: VBIOS does not enable LVDS. Int-LVDS: VBIOS enables LVDS driver by

Integrated encoder. SDVO LVDS: VBIOS enables LVDS driver by SDVO encoder. eDP Port-A: LFP Driven by Int-DisplayPort

encoder from Port-A. eDP Port-D: LFP Driven by Int-DisplayPort encoder from Port-D (through PCH).

Panel Color Depth

Select the LFP Panel Color Depth

NB PCIe Configuration

PEG0 – Gen X

Configure PEG0 B0:D1:F0 Gen1-Gen3

PEG0 ASPM

Control ASPM support for the PEG: Device1 Function 0.This has no effect if PEG is not the currently active device.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

Keine Kommentare

Adlink Express-IB Bedienungsanleitung Seite 63