Adlink Express-LPC Bedienungsanleitung PDF herunterladen (Seite 55)

Page 55Express-IA533 User’s Manual Page 55Express-IA533 User’s ManualExpress-LPC User’s Manual Page 55

Remote Access

Select this option to Enable or Disable the BIOS remote access feature here.

Enabled Remote Access requires a dedicated serial port connection. Once both serial

ports are configured to disabled, you should set this value to Disabled or it may cause

abnormal boot.

Serial Port Number

Select the serial port you want to use for the remote access interface. You can set the value

for this option to either COM1 or COM2.

If you have changed the resource assignment of the serial ports in Advanced>Onboard

Device Configuration>SuperIO Configuration, you must Save Changes and Exit, reboot the

system, and enter the setup menu again in order to see those changes reflected in the

available Remote Access options.

8.3.10 Remote Access Configuration

Remote Access Configuration

Remote access configuration provides the settings to allow remote access by another

computer to get POST messages and send commands through serial port access. This

screen will not be visible if the module is used on a carrier w/o a SuperIO chip, due to lack of

serial port support.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 85 86

Keine Kommentare

Adlink Express-LPC Bedienungsanleitung Seite 55