Adlink PCI-7256 Bedienungsanleitung PDF herunterladen (Seite 19)

Installation

•

2.4 Jumper Setting

The PCI-7256 is a ‘plug and play’ add-on card for PCI bus. It is not necessary

for user to setup its base address and IRQ level to fit the hardware of your

computer system. However, to fit user’s versatile operation, there are still a

few jumpers to set for the digital input.

The jumpers on PCI-7256 card are used to configure the digital input

channels as AC-Filtered or Non-AC-Filtered inputs. Each digital input channel

and their corresponding jumpers are shown in the following Table2.1.

JUMPER INPUT SIGNAL

JP1 DI0 ~ DI7

JP2 DI8 ~ DI15

Table 2.1 The jumpers and DI channels

The default setting of the input signal selection is

Non-AC-Filtered

( DC

signal input), which is shown as below :

Figure 2.2 Default Input Signal Jumper Setting

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Keine Kommentare

Adlink PCI-7256 Bedienungsanleitung Seite 19