Adlink CoreModule 745 Bedienungsanleitung PDF herunterladen (Seite 45)

Chapter 4 BIOS Setup

CoreModule 745 Reference Manual 39



South Bridge Chipset Configuration

• SMBUS Controller [Enabled; Disabled]

• Onboard Ethernet Controller [Enabled; Disabled]

• Video Function Configuration



Initiate Graphic Adapter [PCI/IGD; IGD]



Internal Graphics Mode Select [Enabled, 8MB]



DVMT Mode Select [DVMT Mode; Fixed Mode]

• DVMT/Fixed Memory [128MB; 256MB; Maximum DVMT]



Boot Display Device [CRT; LVDS; CRT + LVDS]



Flat Panel Type [640x480; 800x600; 1024x768; 1280x800; 1366x768]



Spread Spectrum Clock [Disabled; Enabled]

• IDE Configuration



ATA/IDE Configuration [Disabled; Compatible; Enhanced]



Legacy IDE Channels [SATA Only; SATA Pri, PATA Sec]



Primary IDE Master [Not Detected]



Primary IDE Slave [Not Detected]



Secondary IDE Master [XGB NANDrive]

• Type [Not Installed; Auto; CD/DVD; ARMD]

• LBA/Large Mode [Disabled; Auto]

• Block (Multi-Sector Transfer) [Disabled; Auto]

•PIO Mode [Auto; 0; 1; 2; 3; 4]

• DMA Mode [Auto; SWDMA0; SWDMA1; SWDMA2; MWDMA0; MWDMA1;

MWDMA2; UDMA0; UDMA1; UDMA2; UDMA3; UDMA4]

• S.M.A.R.T. [Auto; Disabled; Enabled]

• 32Bit Data Transfer [Disabled; Enabled]



Secondary IDE Slave [Not Detected]



Third IDE Master [Not Detected]



Third IDE Slave [Not Detected]



AHCI Settings

• AHCI Port0 [Not Detected]

• AHCI Port2 [Not Detected]

• Super IO Configuration



Serial Port1 Address [Disabled; 3F8; 3E8; 2E8]

• Serial Port1 IRQ [3; 4; 10; 11]

• RS-485 Control for SP1 [Disabled; Enabled]



Serial Port2 Address [Disabled; 2F8; 3E8; 2E8]

• Serial Port2 IRQ [3; 4; 10; 11]

• RS-485 Control for SP2 [Disabled; Enabled]

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Adlink CoreModule 745 Bedienungsanleitung Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Adlink CoreModule 745