Adlink CoreModule 920 Bedienungsanleitung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 64
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
CoreModule 920 Reference Manual 5
Chapter 2 Product Overview
This overview presents general information about the PCI/104-Express form factor and the CoreModule 920
Single Board Computer (SBC). After reading this chapter you should understand the following points with
regard to the CoreModule 920.
PCI/104-Express From Factor
Product Description
Major Components (ICs)
Headers, Connectors, and Sockets
Product Specifications
PCI/104-Express Form Factor
This product is based on PCI Express architecture and the PCI/104-Express form factor. The PCI/104-
Express form factor affords a great deal of flexibility in system design. You can build a simple system using
only a CoreModule SBC, input/output devices connected to serial, USB, or SATA ports, and the on-board
storage device. To expand a simple CoreModule system, simply add self-stacking expansion modules to
provide additional capabilities, such as:
Additional serial and parallel ports
Analog or high-speed digital I/O
Data Acquisition (Analog In/Out)
USB 2.0 expansion modules
IEEE 1394 (FireWire) expansion modules
Standard VGA video output
PCI/104-Express-compliant expansion modules can be stacked with a CoreModule SBC, avoiding the need
for large, expensive card cages and backplanes. These expansion modules can be mounted directly to the
expansion connectors of the CoreModule, with inter-board spacings of ~0.6 inches, so that a 3-module
system fits in a 4.6" x 3.8" x 2.0" space. See Figure 2-1.
One or more PCI/104-Express-compliant modules can be installed on the CoreModule SBC expansion
connectors so that the expansion modules fit within the CoreModule outline dimensions. The PCI/104-
Express form factor allows for several modules to be stacked up or down from the CoreModule expansion
connectors with each additional module increasing the thickness of the package by ~17mm (0.6"). See
Figure 2-1.
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare